Ronadeck Fast Flake System
The new Ronadeck Fast Flake System combines a fast curing resin adhesive with highly decorative flake chips and clear hardwearing seal coats to produce an attractive floor finish for commercial, residential and light industrial flooring.
The system allows speedy application and fast cure on concrete and other substrates and will accept foot and heavier traffic after only 11 hours. This makes the system ideal for overnight or weekend work where disruption to normal working and traffic flow must be minimised or avoided.
A repair, levelling and resurfacing screed or mortar is first applied to fill any open pores in the surface, repair major or minor blemishes and smooth the surface. The resin is applied to the prepared and dried surface followed by the special flakes, coated to allow intimate chemical bonding to the resin and to the subsequently applied seal coat. Finally two coats of fast curing clear seal coat are applied to provide the final surface.
Areas of use include:
- pedestrian and light industrial including fork truck
- wet and dry areas
- office, commercial, residential
- swimming pool surrounds
- kitchen floors, canteens
- health and leisure
- warehousing, factory, laboratory
- transport: airports, stations, underground
- retail, showrooms, offices
Key features of the Ronadeck Fast Flake System include:
- Highly decorative floor finish
- Fast curing system – ready to traffic within as little as 7 hours
- Suitable for internal and external use
- For foot, light and medium industrial traffic
For further information telephone Daniel Freedman on 01279 638 700.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
