Home
>
Products
>
Resin Bound Surfacing
> See it being laid
Ronadeck Resin Bound Surfacing
Pour Part B Resin into Part A container
Mix resin with drill and paddle mixer
Pour mixed resin into large mixer
Pour dry, blended decorative aggregate into mixer
Mix resin and aggregate
Discharge mixed resin and aggregate onto dry prepared surface
Spread with trowel to achieve levels
Ensure minimum depths are achieved
Trowel to achieve depths and desired finish
Correct compaction will ensure water permeability (SuDS)
Finished surface can receive traffic within 4 hours
Ronacrete Limited
Ronac House, Flex Meadow, Merring Way, Harlow, Essex CM19 5TD United Kingdom
T +44 (0) 1279 638700 | E
techweb@ronacrete.co.uk
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
