Polymer modified, pre-packed fairing coat

Description

RonaBond FC for Prison Cells is a pre-packed fairing coat mortar which is applied as a skim coat in thicknesses up to 3mm to provide a smooth, hard finish to damaged, blemished and repaired concrete surfaces.  RonaBond FC for Prison Cells is used as a levelling mortar prior to the application of protective coatings and paints. It can also be used to give a “harder than plaster” finish to walls in, for example, prisons and detention centres.  The material is supplied in preblended form which can be mixed by hand or machine in small lots.

 

Application is by trowel or brush. The surface should be sponge or tight trowelled for a smooth finish before dry. It is recommended that for aesthetics reasons only RonaBond FC for Prison Cells is covered with a protective and/or decorative coating.

    Quick Question?







    Our Product range

    RonaScreed 8 Day Overlay Fast Drying Screed – benefits and drying

    RonaScreed 8 Day Overlay Fast Drying Screed (formerly Uniscreed Standard) is so called because it is a fast-drying screed additive which enables a 50mm thickness of 3:1 sand/ cement screed to be overl ...

    Read more

    Drying of Screeds

    BS 8204-1 “Concrete bases and cementitious levelling screeds to receive floorings — Code of practice” section 6.11.1 suggests the following calculation for drying of screeds with no fast drying additi ...

    Read more

    Avoidance/ Mitigation Of The Effects Of Common Forms Of Cracking In Cementitious Screeds

    Aggregate is usually 0–4 mm and is mixed with cement in the ratio of 1:3 or 1:4 cement to sand, depending on strength requirements and drying requirements. For total screed thicknesses in excess of 50 ...

    Read more

    Here to help...