UV stable, SuDS Compliant Permeable Paving System

Description

RonaDeck Resin Bound Surfacing is a resin bound aggregate surface for pedestrian and light vehicular traffic. RonaDeck Resin Bound surfaces are decorative and functional, seamless and slightly flexible. Furthermore, the open matrix allows water to drain through to the base. As a result water ponding is eliminated, allowing water to drain to natural water courses, land drains or planted areas. The surfacing may be applied to SuDS compliant bases and sub-bases, reducing the impact of new development on flood risk, or to impermeable bases laid to adequate falls. Edgings created from brick, stone, timber or steel should be installed to retain and protect the resin bound surfacing.

    Quick Question?







    RonaDeck Resin Bound Surfacing Build Ups

    Different applications require different build ups. To find out more about the specific build up requirements for different applications, click here.

    Slip Resistance Values of RonaDeck Resin Bound Surfacing

    RonaDeck Resin Bound Surfacing aggregate blends have been tested for slip resistance in accordance with BS8204-6:2008+A1:2010 Appendix B. It has been tested in both wet and dry conditions. Test results have been converted to show Pendulum Test Values (PTV).

    Blend PTV Risk of Slip
    Atlantic Silver 67 Low
    Autumn Forest 50 Low
    Aztec Gold 48 Low
    Black Pearl 71 Low
    Harvest Crunch 50 Low
    Maple Glow 45 Low
    Midnight 71 Low
    Oyster 56 Low
    Riverbed 52 Low
    Rose Garden 74 Low
    Silver Blue 44 Low
    Terragrey 57 Low
    Blend PTV Risk of Slip
    Atlantic Silver 59 Low
    Autumn Forest 34 Medium
    Aztec Gold 37 Low
    Black Pearl 48 Low
    Harvest Crunch 39 Low
    Maple Glow 48 Low
    Midnight 58 Low
    Oyster 44 Low
    Riverbed 40 Low
    Rose Garden 51 Low
    Silver Blue 42 Low
    Terragrey 46 Low

    Our Product range

    RonaScreed FastDry Prompt – benefits and drying

    RonaScreed FastDry Prompt (formerly RonaScreed 8 Day Overlay) is so-called because it is a fast-drying screed additive which enables a 50mm thickness of 3:1 sand/ cement screed to be overlaid with moi ...

    Read more

    Drying of Screeds

    BS 8204-1 “Concrete bases and cementitious levelling screeds to receive floorings — Code of practice” section 6.11.1 suggests the following calculation for drying of screeds with no fast drying additi ...

    Read more

    Avoidance/ Mitigation Of The Effects Of Common Forms Of Cracking In Cementitious Screeds

    Aggregate is usually 0–4 mm and is mixed with cement in the ratio of 1:3 or 1:4 cement to sand, depending on strength requirements and drying requirements. For total screed thicknesses in excess of 50 ...

    Read more

    Here to help...