Clear silicate based floor and wall sealer, matt appearance

Description

RonaFloor Matt Floor and Wall Sealer WB is a single component water based silicate matt sealer which provides good abrasion, stain and weather resistance. RonaFloor Matt Floor and Wall Sealer WB is non film-forming and its UV resistance prevents yellowing.

Technical Data

Coverage (approx) 6-10m² per litre per coat
Number of coats 2 typical, more on very porous substrates
Touch dry 2 hours @ 20oC & 60% RH
Re-coatable 2-24 hours @ 20oC & 60% RH
Light pedestrian traffic 4 hours, light vehicle traffic 24 hours @ 20oC & 60% RH
Full cure 7 days
Flash point 26oC
Application limits 5oC to 25oC & 30%-70% RH

Our Product range

DRYING OF SCREEDS

BS 8204-1 “Concrete bases and cementitious levelling screeds to receive floorings — Code of practice” section 6.11.1 suggests the following calculation for drying of screeds with no fast drying additi ...

Read more

AVOIDANCE/ MITIGATION OF THE EFFECTS OF COMMON FORMS OF CRACKING IN CEMENTITIOUS SCREEDS

Aggregate is usually 0–4 mm and is mixed with cement in the ratio of 1:3 or 1:4 cement to sand, depending on strength requirements and drying requirements. For total screed thicknesses in excess of 50 ...

Read more

Carbonation of Reinforced Concrete

Carbonation is the single most common cause of reinforcement corrosion in above ground structures and although many construction professionals and contractors are familiar with the progression of carb ...

Read more

Here to help...