Ronacrete Approved Contractor Request

Have your system installed by one of our specialist approved contractors.

Ronacrete highly recommend that products are applied by one of our Approved Contractors.  Ronacrete can offer a product warranty up to 15 years to our Approved Contractors who are able to provide a contractual guarantee for the work carried out.

 

If you would like Ronacrete to recommend an Approved Contractor in your area please phone 01279 638700 with details of the project you have in mind. Alternatively you can fill in the form below and ask for an Approved Contractor again giving details of the project/products being used.

 

Ronacrete can recommend Approved Contractors for all five of their product ranges: Concrete Repair and Coatings, Flooring and Bedding, Resin Bound and Bonded Surfacing, Screeds and, Waterproofing and Tanking.

 

A Ronacrete Approved Contractor should be able to show you a signed certificate covering their area of expertise. The logos and certificates are colour coded to differentiate between the five ranges covered, very few contractors are approved in all five specialisms.

 

If you are unsure that a contractor is a bone fide Approved Contractor, please contact our offices and we will be able to check for you and recommend an alternative if necessary.

Fill out the form to request details of Ronacrete Approved Contractors!

    RonaScreed FastDry Prompt – benefits and drying

    RonaScreed FastDry Prompt (formerly RonaScreed 8 Day Overlay) is so-called because it is a fast-drying screed additive which enables a 50mm thickness of 3:1 sand/ cement screed to be overlaid with moi ...

    Read more

    Drying of Screeds

    BS 8204-1 “Concrete bases and cementitious levelling screeds to receive floorings — Code of practice” section 6.11.1 suggests the following calculation for drying of screeds with no fast drying additi ...

    Read more

    Avoidance/ Mitigation Of The Effects Of Common Forms Of Cracking In Cementitious Screeds

    Aggregate is usually 0–4 mm and is mixed with cement in the ratio of 1:3 or 1:4 cement to sand, depending on strength requirements and drying requirements. For total screed thicknesses in excess of 50 ...

    Read more

    Here to help...