Mortar for re-profiling vertical and overhead surfaces

Description

RonaBond Re-Profiling Mortar is a pre-packed mortar requiring only the addition of clean water.  It is designed to produce a smooth, level finish for concrete and masonry surfaces. The finished product can be over-coated or can be left as the finished surface.

 

RonaBond Re-Profiling Mortar can be used as a levelling mortar for prepared vertical and overhead surfaces prior to the application of protective coatings or paints. RonaBond Re-Profiling Mortar can be applied to vertical surfaces from a thickness of 3mm to 30mm or to overhead surfaces from 3mm to 20mm.

Quick Question?







Our Product range

DRYING OF SCREEDS

BS 8204-1 “Concrete bases and cementitious levelling screeds to receive floorings — Code of practice” section 6.11.1 suggests the following calculation for drying of screeds with no fast drying additi ...

Read more

AVOIDANCE/ MITIGATION OF THE EFFECTS OF COMMON FORMS OF CRACKING IN CEMENTITIOUS SCREEDS

Aggregate is usually 0–4 mm and is mixed with cement in the ratio of 1:3 or 1:4 cement to sand, depending on strength requirements and drying requirements. For total screed thicknesses in excess of 50 ...

Read more

Carbonation of Reinforced Concrete

Carbonation is the single most common cause of reinforcement corrosion in above ground structures and although many construction professionals and contractors are familiar with the progression of carb ...

Read more

Here to help...