RonaDeck Resin Bound Surfacing

VIEW PRODUCT

RonaDeck EcoPath UV

VIEW PRODUCT

RonaDeck EcoAgg

VIEW PRODUCT

RonaDeck Resin Bonded Surfacing

VIEW PRODUCT

RonaDeck Resin Bonded Pore Filler

VIEW PRODUCT

RonaDeck Resin Bonded Scratch Coat

VIEW PRODUCT

RonaDeck Resin Bonded Seal Coat UV

VIEW PRODUCT

RonaDeck UV Wet Pour Rubber Granule Surfacing

VIEW PRODUCT

RonaDeck Soft Feel Pool Surround

VIEW PRODUCT

RonaDeck Eco Tree Pit

VIEW PRODUCT

RonaDeck UV Rubber Granule Tree Pit

VIEW PRODUCT

Resin Bound and Bonded Surfacing

The RonaDeck Resin Bound and Resin Bonded Surfacing provide highly decorative and functional systems for exterior pavement surfacing.  RonaDeck Resin Bound Surfacing, RonaDeck EcoPath UV and RonaDeck Eco Tree Pit consist of UV stable resin and natural aggregates (RonaDeck EcoPath UV also incorporates recycled rubber granules) producing highly permeable and slip resistant surfacing systems.  The UV stable resins used in RonaDeck products are unaffected by the discolouration, embrittlement and degradation which is characteristic of resin products which are not UV stable.  RonaDeck Resin Bonded Surfacing is typically self priming and provides excellent slip resistance for pedestrians and high friction surfacing for vehicles. RonaDeck products are tested for slip resistance in accordance with BS 8204-6:2008+A1:2010 Appendix B. RonaDeck UV Wet Pour Rubber Granule Surfacing, RonaDeck Soft Feel Pool Surround and RonaDeck Rubber Granule Tree Pit consist of coloured EPDM rubber granules and UV stable resin, producing surfaces which are soft and safe underfoot; they provide noise absorbency and they are sufficiently resilient to absorb the impact of falls. UV stable resins ensures that surfacing systems are unaffected by discolouration, embrittlement and degradation caused by UV light.

 

To see where RonaDeck Resin Bound and Resin Bonded Surfacing systems have been used, view our gallery by clicking here.

Conisbrough Castle

RonaDeck Resin Bound Surfacing with Beige Pearl aggregate was laid to over 300 square metres at the 12th century Grade I listed Conisbrough Castle, Doncaster.

Read more

Wembley Stadium

RonaDeck Resin Bonded Surfacing was chosen to provide a hard wearing and slip resistant surfacing to the tarmac ramps which provide access to Wembley Stadium, ensuring that crowds can gain access to the Stadium in safety in even the wettest of weather conditions.

Read more
resin bound surfacing application
resin bonded surfacing application

Difference Between Resin Bound and Resin Bonded Surfacing

Resin Bound and Bonded Surfacing – similar names, very different materials. The similarity of the names can be a cause of confusion and while both materials contain resin and visible kiln-dried aggregate, their appearance and often their uses are quite different.

Resin Bound Surfacing

Resin Bound Surfacing comprises kiln-dried aggregate bound with clear resin, typically polyurethane and is laid from 15mm to 20mm thickness. Aggregate is coated with resin during mixing and resin exposed to sunlight will perform differently, depending on the type of resin used. Ronacrete products for resin bound surfacing are formulated with UV stable HDI resins and will not discolour or degrade when exposed to sunlight. MDI resins yellow, darken and have been seen to degrade after exposure to sunlight. Resin Bound Surfacing is porous and can be used as part of a SuDS compliant pavement construction.

Resin Bonded Surfacing

Resin Bonded Surfacing comprises a layer of polyurethane resin with kiln-dried aggregate embedded in the freshly applied resin layer, RonaDeck Resin Bonded Surfacing is typically laid on concrete or asphalt at a thickness of approximately 3mm.

See technical article “The Choice, Resin Bound Surfacing or Resin Bonded Surfacing” for more information.

Polymer Modification of Cementitious Mortars

Compressive strength of unmodified concrete and mortars can continue to increase slowly af......

Read more

Here to help...